You should be aware of the use of injection molding machines.

- May 12, 2019-

You should be aware of the use of injection molding machines.

The injection molding machine can complete the injection molding operation, but the following points should be noted when the staff use it, so as to ensure the safety of the production process and personal safety.

If the temperature of the injection molding machine rises, then the damage caused to us in this case is still very much. For example, it can give the problem of distorting the machine. Because the hydraulic expansion coefficient of the hydraulic part is different, then its clearance will change accordingly, so that there is a possibility of system failure, and the accuracy of the hydraulic system's own transmission will naturally affect, and the quality of the machine's work will be degraded.

An increase in temperature will cause the viscosity of the oil to drop. If such a situation arises, it will cause all system functions of the injection molding machine to decline. Since the viscosity is lowered, the wear of the parts of the lubricating portion is greatly increased, which causes an increase in wear. If the temperature is too high, the parts of the rubber structure are damaged. Because if the temperature is too high, then the aging speed of the rubber will be accelerated, so that its sealing performance is lowered, the service life is also reduced, and a leakage accident occurs. If the temperature is too high, it may be caused by blockage of the pipeline, such as blockage of the filter and blockage of the cooling tower.

There are many problems caused by excessive temperature. Therefore, the staff must circumvent this problem when handling, and should be dealt with in a timely manner if it occurs. In the usual operation of the machine, you must also pay attention to the removal of various safety devices. If there are any errors or accidents in the safety facilities, the machine needs to be shut down. Before restarting the injection molding machine, it must be ensured that the fault has been eliminated.